Catalog

Angled oil level indicator

made of stainless steel, similar to DIN 3018, form C

Angled oil level indicator

made of pressed brass, DIN 3018, form B

Angled oil level indicator

made of pressed brass, DIN 3018, form C

Angled oil level indicator

made of pressed brass, DIN 3018, form D

Angled oil level indicator

made of pressed brass, DIN 3018, form E

Ball valve with female thread

Made of stainless steel 1.4408/1.4401

Brass oil level gauge, for screwing in

Natural glass pane, with reflector and seal, Tmax = 120°C

Brass oil level gauge, for screwing on

round version, with reflector & seal, housing and reflector in two parts

Brass oil level gauge, fused glass

for screwing in, natural glass disk, Tmax = 150°C, Pmax = 64bar

Clamping sleeve DIN 16283

made of stainless steel, steel or brass

Container sight glass made of steel / stainless steel

According to DIN 28120, PN 10 or PN 16

Display unit for steam boiler draining device

For up to 7 bar operating pressure and up to 4 screw-ins

Drain cock made of 1.4571

Curved outlet, PN 6

Drain cock made of 1.4571

Straight outlet, PN 6

Flow rate cylindrical sight glass

Made of stainless steel with ANSI flange connection

Flow rate cylindrical sight glass

Made of stainless steel with DIN flange connection

Flow rate cylindrical sight glass

Made of stainless steel with socket thread

Flow rate cylindrical sight glass

Made of gunmetal with socket thread

Flow rate cylindrical sight glass

Made of steel with ANSI flange connection

Flow rate cylindrical sight glass

Made of steel with DIN flange connection

Flow sight glass according to DIN 11869

Flow sight glass according to DIN 11869

Flow sight glass with ANSI flange

Made of cast iron, cast steel or cast stainless steel, 150 lbs or 300 lbs

Flow sight glass with ANSI flange & rotor

Made of cast iron, cast steel or cast stainless steel, 150 lbs or 300 lbs

Flow sight glass with DIN flange & rotor

Made of gray cast iron, cast steel or cast stainless steel, PN 16, PN 25 or PN 40

Flow sight glass with socket thread

Made of gray cast iron, cast steel or cast stainless steel, PN 16, PN 25 or PN 40

Flow sight glass with socket thread & rotor

Made of gray cast iron, cast steel or cast stainless steel, PN 16, PN 25 or PN 40

Flow sight glass with weld end

For installation in pipelines, made of stainless steel or steel.

Flow sight glass, DIN 3237 with DIN flange

Made of gray cast iron, cast steel or cast stainless steel, PN 16, PN 25 or PN 40

High-pressure shut-off angle valve

made of steel or stainless steel

High-pressure shut-off valve, male or female thread on both sides

made of stainless steel or steel

High-pressure shut-off valve, split ring connection on both sides

made of stainless steel or steel

Intermediate glass tube holder

With flange connection for stabilizing pipes

Intermediate glass tube holder

With spigot connection for stabilizing pipes

Liquid level indicator

made of gunmetal PN 25

Liquid level indicator

made of gunmetal PN 10

Liquid level indicator with ball valve & flange connection

PN 16 made of stainless steel

Liquid level indicator with ball valve & flange connection

Made of stainless steel, PN 16

Liquid level indicator with ball valve & spigot connection

PN 16 made of stainless steel

Liquid level indicator with ball valve & spigot connection

Made of stainless steel, PN 16

Liquid level indicator with flange connection

without shut-off & drain cock, made of stainless steel (PN 16)

Liquid level indicator with male thread connection

without stop valve and drain cock, made of brass (PN 10) or stainless steel (PN 16)

Liquid level indicator with self-closing

made of brass, PN 10, flange or tap connection